GENSYS A53Z0-OPT02 HMI 

Gensys 2.0 Genset Controller With Integrated PLC

Gensys 2.0 is an all-in-one genset control and paralleling unit with integrated PLC, designed for generator electrical panels.

Programming By Equations

The 2.0 controller is a real PLC unit where equations and sequences can be programmed directly by the user with text editor software or Easy PLC software.

Inputs / Outputs With No Limits

The number of inputs/outputs that can be added is one of the most important on the market. Extension modules (DIN rail mounting) can be added on the CAN bus. This extends a large number and a large diversity of inputs/outputs up to 128 digital inputs, 64 digital outputs, 44 analog inputs, 32 analog outputs and CANopen standard module.

Minimum Options

The Gensys 2.0 is offered with a minimum of options to fit all types of application without expensive add-on packages. The standard Gensys 2.0 unit is recommended for all types of power plant, from 1 to 32 generators.

For specific needs, the following options are available:
  Mains paralleling
  Phase shift compensation
  External start module management

Inter-Unit Isolated CANbus

The Gensys 2.0 features an isolated CANbus dedicated to inter-module communication (dead busbar management, static paralleling, kW and kVAR load sharing). CANbus technology provides high reliability communication while maintaining low wiring cost and complexity.

Features:

This "all-in-one unit combines all necessary functions:
  Three phases mains failure
  Engine start/stop and protections
  Alternator control and protections
  Mechanical parameters display
  Electrical parameters display
  Genset synchronization
  Load sharing and kW control
  Load sharing and kVAR control
  J1939 communications
  Configurable via its front panel or via a PC with CRE Config software. It has an embedded website which is password protected
  Includes analog load sharing lines and is compatible with most of the types of analog load sharing modules